Loading

Module 1: Design of Batten Plates and Column Splices

Study Reminders
Support
Text Version

Set your study reminders

We will email you at these times to remind you to study.
  • Monday

    -

    7am

    +

    Tuesday

    -

    7am

    +

    Wednesday

    -

    7am

    +

    Thursday

    -

    7am

    +

    Friday

    -

    7am

    +

    Saturday

    -

    7am

    +

    Sunday

    -

    7am

    +

Video 1
in previous lecture we havegone through one example for design of Batten system using bolt connections. Now the sameexample we will carried out using weld connections. Now in case of weld connections howthe batten depth is going to change that will be demonstrated and then how the weld lengthwill be distributed and how the weld size will be obtained those things will be discussedthrough one example right.
Example: A batten column of 10-m long is carrying a factored load of 1150 kN. The columnis restrained in position but not in direction at both ends. Design a built up column usingchannel sections placed back to back.Design batten plates using weld connection.'
Video 2
Design of weld:Welding is done on all the four sides as shown in the figure.