FLASH SALE: 25% Off Certificates and Diplomas! Sale ends on Friday, 4th December 2020Claim My 25% Discount
We'll email you at these times to remind you to study
You can set up to 7 reminders per week
We'll email you at these times to remind you to study
Q: How can you make sure the performance appraisal ties into a specific job description? Ans: By applying the appropriate performance methods to a specific job since there are variety of methods that can be use to determining employees specific performance, and for example there are four main method of determining performance which are 1] Trait method: This managers look at an employees specific traits in relation to the job, such as friendliness to the customer. 2] Behavioral method: This method looks at individual actions within a specific job. 3] Comparative method: This compares one employee with an other employees. 4] Results method: This method focused on employee accomplishment, such as whether or not employees met a quota. In category of performance appraisals there are two main aspects to appraisal methods. 1] Criteria: The employee is actually being evaluated on, tied directly to the employees job description. 2] Rating: The type of scale that will be used to rate each criterion in a performance evaluation. e.g. Scales of 1-5, essay ratings, yes/no ratings.
Q: Review each of the appraisal methods and discuss which one you might use for the following types of jobs and discuss you choices. a) Administrative Assistant b) Chief Executive Officer c) Human Resource Manager d) retail Store Assistant Manager. Ans: 1) Graphic Rating Scale: This is a behavioral method which perhaps is the most popular choice for performance evaluation that lists traits required for the job and asks the source to rate the individual on each attribute. Example A continuous scale shows a scale and the manager puts a mark on the continuum scale that best represents the employees performance and I believe this is suitable for Administrative Assistant. 2) Management by Objectives (MBO): This method is result oriented and also similar to the work standards approach, with a little differences and is a concept developed by Peter Drucker. In this approach the manager and employ sit down together and develop solid and clear objectives for the time period and when it time for the performance evaluation, the manager and employee should also sit down to review the goals that were set and determine whether they were met. And this gives room for open communication between the manager and the employee which also has the chance of "buy-in" since the employee also helped set the goals. To this method the managers and employee should be able to write strong objectives, however, the method is require a higher level of thinking to perform the job which is best applied for Chief Executive Officer and Administrative Assistants. 3) Ranking Methods/Stack Ranking: In this type of approach employees in a particular department are ranked based on their value to the manager or supervisor which is comparative method for performance evaluations. where the manager will have a list of all employees and will first choose the most valuable employee and put that name at the top and also choose the least valuable employee and put that name at the bottom of the list and the same process would be repeated with other employees. This should goes for Human Resource Manager. 4) Behaviorally Anchored Rating Scale (BARS): It determines the main performance dimension of the job. i.e interpersonal relationships, the tool utilizes narrative information and assigns quantified ranks to each expected behavior and in this system there is a specific narrative outlining what exemplifies a "good" and "poor" behavior for each category. By the way this type of system focus on the desired behaviors that are important to complete a task or perform a specific job. How ever the method combines a graphic rating Scale wit a critical incidents system, which is good and suitable for Retail Store Assistant Manager. In the long run of these appraisal methods I still prefer the Management by Objective (MBO) because it gives result oriented and which also similar to the work standards approach, which gives room for open communication between the manager and the employees to set a strong and clear objectives for the time period so my choice is management by objectives (MBO).
The above topic clearly outlines the various methods used to conduct the appraisal, but the real strength for the successful evaluations mainly depends upon the appraisal method that has chosen, and to choose a appraisal method firstly we have to define the performance standards to be achieved, and it should be properly understood and communicated to the employees, and moreover the method chosen should be error free. And, there are several other modern based appraisal methods like MBO, 360-DEGREES, ASSESSMENT-CENTRES, can be successfully implemented to evaluate the employees performance towards his/her assigned job.
the above outlines is conducted appraisal . this is help us to have a workable platform where the employees and employers can have a successful relationship.
Traits, behavior, comparative and result methods are critical when appraise performance of employees
1. Be able to describe the various appraisal methods.
It probably goes without saying that different industries and jobs need different kinds of appraisal methods. For our purposes, we will discuss some of the main ways to assess performance in a performance evaluation form. Of course, these will change based upon the job specifications for each position within the company. In addition to industry-specific and job-specific methods, many organizations will use these methods in combination, as opposed to just one method. There are three main methods of determining performance. The first is the trait method, in which managers look at an employee’s specific traits in relation to the job, such as friendliness to the customer.
The behavioral method looks at individual actions within a specific job.Comparative methods compare one employee with other employees.Results methods are focused on employee accomplishments, such as whether or not employees met a quota.
Within the categories of performance appraisals, there are two main aspects to appraisal methods. First, the criteria are the aspects the employee is actually being evaluated on, which should be tied directly to the employee᾿s job description. Second, the rating is the type of scale that will be used to rate each criterion in a performance evaluation: for example, scales of 1–5, essay ratings, or yes/no ratings. Tied to the rating and criteria is the weighting each item will be given. For example, if “communication” and “interaction with client” are two criteria, the interaction with the client may be weighted more than communication, depending on the job type. We will discuss the types of criteria and rating methods next.
Graphic Rating Scale
The graphic rating scale, a behavioral method, is perhaps the most popular choice for performance evaluations. This type of evaluation lists traits required for the job and asks the source to rate the individual on each attribute. A discrete scale is one that shows a number of different points. The ratings can include a scale of 1–10; excellent, average, or poor; or meets, exceeds, or doesn’t meet expectations, for example. Acontinuous scale shows a scale and the manager puts a mark on the continuum scale that best represents the employee’s performance. For example:
The disadvantage of this type of scale is the subjectivity that can occur. This type of scale focuses on behavioral traits and is not specific enough to some jobs. Development of specific criteria can save an organization in legal costs. For example, in Thomas v. IBM, IBM was able to successfully defend accusations of age discrimination because of the objective criteria the employee (Thomas) had been rated on.
Many organizations use a graphic rating scale in conjunction with other appraisal methods to further solidify the tool’s validity. For example, some organizations use amixed standard scale, which is similar to a graphic rating scale. This scale includes a series of mixed statements representing excellent, average,
and poor performance, and the manager is asked to rate a “+” (performance is better than stated), “0” (performance is at stated level), or “−” (performance is below stated level). Mixed standard statements might include the following:
• The employee gets along with most coworkers and has had only a few interpersonal issues.
• This employee takes initiative.
• The employee consistently turns in below-average work.
• The employee always meets established deadlines.
An example of a graphic rating scale is shown in Figure 11.1 "Example of Graphic Rating Scale".
In an essay appraisal, the source answers a series of questions about the employee’s performance in essay form. This can be a trait method and/or a behavioral method, depending on how the manager writes the essay. These statements may include strengths and weaknesses about the employee or statements about past performance. They can also include specific examples of past performance. The disadvantage of this type of method (when not combined with other rating systems) is that the manager’s writing ability can contribute to the effectiveness of the evaluation. Also, managers may write less or more, which means less consistency between performance appraisals by various managers.
A checklist method for performance evaluations lessens the subjectivity, although subjectivity will still be present in this type of rating system. With a checklist scale, a series of questions is asked and the manager simply responds yes or no to the questions, which can fall into either the behavioral or the trait method, or both. Another variation to this scale is a check mark in the criteria the employee meets, and a blank in the
areas the employee does not meet. The challenge with this format is that it doesn’t allow more detailed answers and analysis of the performance criteria, unless combined with another method, such as essay ratings. A sample of a checklist scale is provided in Figure 11.3 "Example of Checklist Scale".
Figure 11.1 Example of Graphic Rating Scale
Figure 11.2 Example of Essay Rating Figure 11.3 Example of Checklist Scale
Critical Incident Appraisals
This method of appraisal, while more time-consuming for the manager, can be effective at providing specific examples of behavior. With a critical incident appraisal, the manager records examples of the employee’s effective and ineffective behavior during the time period between evaluations, which is in the behavioral category. When it is time for the employee to be reviewed, the manager will pull out this file and formally record the incidents that occurred over the time period. The disadvantage of this method is the tendency to record only negative incidents instead of postive ones. However, this method can work well if the manager has the proper training to record incidents (perhaps by keeping a weekly diary) in a fair manner. This approach can also work well when specific jobs vary greatly from week to week, unlike, for example, a factory worker who routinely performs the same weekly tasks.
Work Standards Approach
For certain jobs in which productivity is most important, awork standards approach could be the more effective way of evaluating employees. With this results-focused approach, a minimum level is set and the employee’s performance evaluation is based on this level. For example, if a sales person does not meet a quota of $1 million, this would be recorded as nonperforming. The downside is that this method does not allow for reasonable deviations. For example, if the quota isn’t made, perhaps the employee just had a bad month but normally performs well. This approach works best in long-term situations, in which a reasonable measure of performance can be over a certain period of time. This method is also used in manufacuring situations where production is extremely important. For example, in an automotive assembly line, the focus is on how many cars are built in a specified period, and therefore, employee performance is measured this way, too. Since this approach is centered on production, it doesn’t allow for rating of other factors, such as ability to work on a team or communication skills, which can be an important part of the job, too.
In a ranking method system (also called stack ranking), employees in a particular department are ranked based on their value to the manager or supervisor. This system is a comparative method for performance evaluations.The manager will have a list of all employees and will first choose the most valuable employee and put that name at the top. Then he or she will choose the least valuable employee and put that name at the bottom of the list. With the remaining employees, this process would be repeated. Obviously, there is room for bias with this method, and it may not work well in a larger organization, where managers may not interact with each employee on a day-to-day basis.
To make this type of evaluation most valuable (and legal), each supervisor should use the same criteria to rank each individual. Otherwise, if criteria are not clearly developed, validity and halo effects could be present. The Roper v. Exxon Corp case illustrates the need for clear guidelines when using a ranking system. At Exxon, the legal department attorneys were annually evaluated and then ranked based on
input from attorneys, supervisors, and clients. Based on the feedback, each attorney for Exxon was ranked
based on their relative contribution and performance. Each attorney was given a group percentile rank (i.e., 99 percent was the best-performing attorney). When Roper was in the bottom 10 percent for three years and was informed of his separation with the company, he filed an age discrimination lawsuit. The
courts found no correlation between age and the lowest-ranking individuals, and because Exxon had a set of established ranking criteria, they won the case. 
Another consideration is the effect on employee morale should the rankings be made public. If they are not made public, morale issues may still exist, as the perception might be that management has “secret” documents.
FORTUNE 500 FOCUS
Critics have long said that a forced ranking system can be detrimental to morale; it focuses too much on
individual performance as opposed to team performance. Some say a forced ranking system promotes too
much competition in the workplace. However, many Fortune 500 companies use this system and have
found it works for their culture. General Electric (GE) used perhaps one of the most well-known forced
ranking systems. In this system, every year managers placed their employees into one of three categories:
“A” employees are the top 20 percent, “B” employees are the middle 70 percent, and “C” performers are
the bottom 10 percent. In GE’s system, the bottom 10 percent are usually either let go or put on a
performance plan. The top 20 percent are given more responsibility and perhaps even promoted.
However, even GE has reinvented this stringent forced ranking system. In 2006, it changed the system to
remove references to the 20/70/10 split, and GE now presents the curve as a guideline. This gives more
freedom for managers to distribute employees in a less stringent manner. 
The advantages of a forced ranking system include that it creates a high-performance work culture and
establishes well-defined consequences for not meeting performance standards. In recent research, a
forced ranking system seems to correlate well with return on investment to shareholders. For example,
the study shows that companies who use individual criteria (as opposed to overall performance) to
measure performance outperform those who measure performance based on overall company success. To
make a ranking system work, it is key to ensure managers have a firm grasp on the criteria on which
employees will be ranked. Companies using forced rankings without set criteria open themselves to
lawsuits, because it would appear the rankings happen based on favoritism rather than quantifiable
performance data. For example, Ford in the past used forced ranking systems but eliminated the system after settling class action lawsuits that claimed discrimination.  Conoco also has settled lawsuits over its
forced ranking systems, as domestic employees claimed the system favored foreign workers.  To avoid
these issues, the best way to develop and maintain a forced ranking system is to provide each employee
with specific and measurable objectives, and also provide management training so the system is executed
in a fair, quantifiable manner.
In a forced distribution system, like the one used by GE, employees are ranked in groups based on high
performers, average performers, and nonperformers. The trouble with this system is that it does not
consider that all employees could be in the top two categories, high or average performers, and requires
that some employees be put in the nonperforming category.
In a paired comparison system, the manager must compare every employee with every other employee
within the department or work group. Each employee is compared with another, and out of the two, the
higher performer is given a score of 1. Once all the pairs are compared, the scores are added. This method
takes a lot of time and, again, must have specific criteria attached to it when comparing employees.
HUMAN RESOURCE RECALL
How can you make sure the performance appraisal ties into a specific job description?
Management by Objectives (MBO)
Management by objectives (MBOs) is a concept developed by Peter Drucker in his 1954 book The Practice of Management.  This method is results oriented and similar to the work standards approach, with a few
differences. First, the manager and employee sit down together and develop objectives for the time period. Then when it is time for the performance evaluation, the manager and employee sit down to review the goals that were set and determine whether they were met. The advantage of this is the open communication between the manager and the employee. The employee also has “buy-in” since he or she helped set the goals, and the evaluation can be used as a method for further skill development. This method is best applied for positions that are not routine and require a higher level of thinking to perform the job. To be efficient at MBOs, the managers and employee should be able to write strong objectives. To
write objectives, they should be SMART: 
1. Specific. There should be one key result for each MBO. What is the result that should be achieved?
2. Measurable. At the end of the time period, it should be clear if the goal was met or not. Usually a number can be attached to an objective to make it measurable, for example “sell $1,000,000 of new business in the third quarter.”
3. Attainable. The objective should not be impossible to attain. It should be challenging, but not impossible.
4. Result oriented. The objective should be tied to the company’s mission and values. Once the objective is
made, it should make a difference in the organization as a whole.
5. Time limited. The objective should have a reasonable time to be accomplished, but not too much time.
SETTING MBOS WITH EMPLOYEES
To make MBOs an effective performance evaluation tool, it is a good idea to train managers and determine which job positions could benefit most from this type of method. You may find that for some more routine positions, such as administrative assistants, another method could work better.
Behaviorally Anchored Rating Scale (BARS)
A BARS method first determines the main performance dimensions of the job, for example, interpersonal relationships. Then the tool utilizes narrative information, such as from a critical incidents file, and assigns quantified ranks to each expected behavior. In this system, there is a specific narrative outlining what exemplifies a “good” and “poor” behavior for each category. The advantage of this type of system is that it focuses on the desired behaviors that are important to complete a task or perform a specific job. This method combines a graphic rating scale with a critical incidents system. The US Army Research
Institute  developed a BARS scale to measure the abilities of tactical thinking skills for combat
leaders. Figure 11.4 "Example of BARS" provides an example of how the Army measures these skills.
Figure u.4 Example of BARS
Behaviorally Anchored Rating Scale (BARS):Performance is assessed along a scale with dea rly defined
scalepoint$containing examples of specific behaviors.
Example: A supervisor of a nurse Indicated which scale point best descri bes the behavior of t he nurse.
BARSfor Army nurses
1 2 3 4 5
SomNimcs falls to follow doctors' ordeoft n impatien t with
doeSil't always follow hospital procl!durcs
Alwoyo folloWs cloct.orf ofdef'l> occasionally impatient With
Alw.: ys follows doctors'orders. OPVPt impati€'nt wil-h difficull ptlhenlS,
Log in to save your progress and obtain a certificate in Alison’s free Modern Human Resource Management - Appraisal and Performance online course
Sign up to save your progress and obtain a certificate in Alison’s free Modern Human Resource Management - Appraisal and Performance online course
Please enter you email address and we will mail you a link to reset your password.