Sign-up today to join over 5 million learners already on ALISON:

Diploma in Project Management


Comments about The analysis phase - The Analysis Phase: defining system performance criteria

The comment must be about:
- Module: The analysis phase
- Topic: The Analysis Phase: defining system performance criteria
Please note: Comments are not reviewed by ALISON Support staff. For technical support, please contact [email protected]

Latest Comments

  • aaa
    Seye Abiodun United Kingdom The standard of the new system is defined.
    2015-05-20 00:05:45

  • aaa
    Abosi Bill [[]] System criteria are very important because they outline the standard that the system must achieve, the level of tasks that the system can handle and the objectives that the proposed changes can be achieve.
    2015-05-19 13:05:59

  • aaa
    NKOTANYI Francis Rwanda This is very summarized.
    2015-05-17 10:05:45

  • aaa
    John Day United Kingdom Performance, time and resources, compete with each other. Each modification of one of these variables has an immediate impact on the two others.
    2015-05-11 15:05:41

  • aaa
    Barnabas Halimani Zimbabwe System performance criteria are very important, they outline the standard that the system must achieve. At the beginning of the project they should be used as design criteria, at the end of the project these are the basis for the system testing and commission. Thus, measurable performance criteria will eliminate ambiguity about installed system performance and reduce customer disputes and increase customer satisfaction.
    2015-05-07 14:05:53

  • aaa
    ZAFRUL HASSAN MUJIB India the minimum level of tasks that the system can handle
    2015-05-07 14:05:39

  • aaa
    Hilary Madzvimbo Zimbabwe it dependents on the project type.
    2015-05-07 07:05:11

  • aaa
    jooj hywrd Iraq What the level of tasks that the system can handle? Depends on what? And how?
    2015-05-05 23:05:26

  • aaa
    Bisheswar Boro India These systems often require either the integration of equipment or subsystems from multiple vendors or the selection of one vendor’s proprietary system over several other proprietary systems.
    2015-04-30 07:04:10

  • aaa
    Ernest Phiri Zambia Sometimes, it is worth to check whether the euipment has performed according to the initial plan and producing the right results. if contray to the plan, the developers would require to improve on the system.
    2015-04-23 11:04:34

  • aaa
    sunday mbiam Nigeria These systems often require either the integration of equipment or subsystems from multiple vendors or the selection of one vendor’s proprietary system over several other proprietary systems. In either case, the electrical contractor is responsible not only for installation but also the design and performance. This is particularly important when the electrical contractor is providing a state-of-the-art system for the customer where there is not a great deal of experience with the technology. Performance specifications, particularly for state-of-the-art systems, increase the electrical contractor’s risk. In order to limit the risk associated with a performance specification the electrical contractor needs to make sure that the system’s performance criteria are clearly defined and measurable
    2015-04-22 13:04:00

  • aaa
    Uba Oguchi Christian Nigeria The Analysis Phase: defining system performance criteria must exceed the levels of performance of the old system. These shows the standards that the system must achieve. In other words, what is the minimum level of tasks that the system can handle. This would include the objectives that the proposed changes are to achieve.
    2015-04-09 11:04:03

  • aaa
    Brian Kuhuni Nigeria It must exceed the levels of the previous system in terms of deliverables
    2015-04-08 12:04:45

  • aaa
    Jahidul Islam Bangladesh defining Employee Performance Criteria?
    2015-04-07 22:04:09

  • aaa
    Jahidul Islam Bangladesh Customers are increasingly using performance specifications to define power, communications and control systems for commercial, industrial and institutional facilities. These systems often require either the integration of equipment or subsystems from multiple vendors or the selection of one vendor’s proprietary system over several other proprietary systems. In either case, the electrical contractor is responsible not only for installation but also the design and performance. This is particularly important when the electrical contractor is providing a state-of-the-art system for the customer where there is not a great deal of experience with the technology. Performance specifications, particularly for state-of-the-art systems, increase the electrical contractor’s risk. In order to limit the risk associated with a performance specification the electrical contractor needs to make sure that the system’s performance criteria are clearly defined and measurable.
    2015-04-07 22:04:58

  • aaa
    Bandar Alalwi United States of America how can system improve ?
    2015-04-06 02:04:26

  • aaa
    Bandar Alalwi United States of America system need to achieve objectives .
    2015-04-06 02:04:01

  • aaa
    Bander Alalwi United States of America what is the minimum level of tasks that the system can handle ?
    2015-04-04 19:04:36

  • aaa
    Bander Alalwi United States of America defining system performance criteria the standards that the system must achieve. what is the minimum level of tasks that the system can handle. This would include the objectives that the proposed changes are to achieve. These criteria must exceed the levels of performance of the old system.
    2015-04-04 19:04:46

  • aaa
    Maria Rosario Acuña-Hilton United States of America In other words the Analysis Phase in defining the system performance criteria is to give us the objective and the best solution for the old system.
    2015-04-03 00:04:45

Loading Menu