Alison's New App is now available on iOS and Android! Download Now
Take-off Weight Build up
Let us have a look at the take-off weight built up or how the take-off weight builds up what are the various components of takeoff weight.
(Refer Slide Time: 00:23)
In initial sizing you can actually consider that the aircraft consists of only 4 elements there is a crew which you have or you may not have if you are flying an unmanned aircraft which is there on the aircraft and then you have a payload which you are supposed to carry you have a fuel and everything else is called as the empty weight. So, the empty weight would consist of the weight of the structures, engines landing gear fixed equipment, avionics, everything other than fuel payload and crew is clubbed into empty weight.
Now, Wcrew and W payload are 2 items that are both known to us, because they will be decided either based on the user specified requirements or we have to take them from the regulatory information or whatever is the normal trend. So, Wfuel and Wempty are the only 2 unknowns. And these depend on the aircraft type and also on the mission profile. So, the takeoff weight built up or W0 gross weight design gross weight that is what we want to calculate. And 2 items in the 4 of these 4 are now going to be available, the remaining 2 are going to be estimated.
(Refer Slide Time: 01:56)
So let us see how we go about doing it. So, what we can do is if 2 of these the crew and the payload are knowns and the other 2 are unknowns, we let the known values remain in the numerator and we try to bring the unknown values in the denominator. To do that, you can see very easily that the equation can be converted into W0= Wcrew+W payload 1−{Wempty
W0+ Wfuel W0 } We also call them as the empty weight fraction w´ e and the fuel weight fraction w´ f . So, we will refer to this from now on as w´ e and w´ f . So, the exercise of estimating W0 is now converted into an exercise of estimating only w´ e and w´ f . These are the 2 unknowns to be
determined.
(Refer Slide Time: 03:01)
Let us first try to tackle Wcrew. Wcrew estimation for transport aircraft is very straightforward process based on the information that is relevant to the operations scenario. The crew of a transport aircraft consists of 2 as 2 different distinct groups of people, there is a cockpit crew.
And the cockpit group generally consists of 2 pilot and the copilot or we also call it as a captain on the first officer at least 2 from the regulatory requirements.
Aircraft more than 9 seats which are carrying passengers that pay fare from safety requirements are required to have minimum 2 people in the cockpit. But for longer flights, because there are something there are some limitations called as the flight duty time limitations FDTL flight duty
time limitations require that a pilot is not expected to fly for a very long period without a rest.
And because of that, if the flight duration exceeds around 10 to 12 hours nonstop flight you need to have more than 2 or more than 1 set of crew members.
Boeing 787 dash 8 aircraft has space for 4 crew members. So we typically assume that each crew member is going to be 175 pounds. Plus it will carry 30 pounds of or they will carry 35 30 pounds of baggage per crew member. In addition to the crew cockpit crew, we also have cabin crew. Now for cabin crew, there is a kind of an understanding that at least 1 crew member will be available to serve and to look after the entrance and safety of 35 passengers so the Boeing 787 dash 8 aircraft has space for 7 crew members.
So, basically, each of these crew members also is assumed to weigh 175 pounds and 130 pounds.
So 205 pounds has to be kept aside as the weight of each crew member plus their baggage. And there are 7 + 4= 11 of these in a Boeing 787 aircraft. So, the crew weight is going to be 11 into 205 pounds which is approximately 1023 kg. So, approximately 1 ton of weight is to be kept
aside for the crew members to operate a Boeing 787 dash 8 aircraft. Now the question is, there are 11 people, where do they take rest. So let us have a look at the rest areas for the crew members of a Boeing 787.
(Video Starts: 05:57)
So, you can see that there is a staircase which is not visible to the passengers and above that you have rest area for the crew members. So 2 pilots are going to be flying the aircraft and the other 2 pilots are going to be taking rest at any given point of time. And this is the place for the cabin
crew members. Again, there is a secret staircase not visible to the passengers where the crew members are taking rest.
(Video Ends: 07:31)
(Refer Slide Time: 07:31)
Let us look at the estimation of payload for transport aircraft. The payload is basically the weight of the passengers the weight of the baggage that they carry and the weight of the cargo that is carried in the aircraft. So, for every passenger again, we can assume the weight to be 175 pounds
plus 35 pounds for their standard baggage. So if you multiply that with number of passengers, you will get the weight of passengers and baggage and Wc argo is a number that depends on how much cargo the airline is carrying.
So, for Boeing 787 the maximum payload weight is 41,400 kg this is the maximum payload capacity. So since it carries 224 passengers, therefore the maximum value of the pax and baggage will be 21343 kilograms. Therefore, the cargo that you can carry with all the passengers would be around 20 tons 220057 kg and if you do not carry any passengers and if you carry only cargo, then it will be 39 tons approximately.
And if you carry maximum cargo, then the margin available is to carry only 20 passengers. So, between 20 and 224 passengers, the amount of passengers that can be carried in the aircraft will vary depending on how much cargo is being carried by the airline.
(Refer Slide Time: 08:59)
So, the typical take-off weight built up is as shown here. This particular breakup, it may be noted is just for a feel when you do calculations of the typical values of the fractions. If you get numbers which are totally different from the number shown here, it should ring a small alarm bell in your mind. But if you are aware that the numbers are going to come very awkward
because you are looking at a designer for totally new aircraft, then you know this is just a warning. So how do we remember?
We remember in the following fashion, roughly half the aircraft is going to be just the empty weight of the remaining half. The half of that or 1 / 4 of the aircraft might be the payload and the remaining 1 / 4 of the aircraft might be the fuel. Now this ratio can change it in some aircraft, the
empty weight maybe 60% in which case you have only 40% remaining in some aircraft the fuel maybe 20%. So, the numbers can vary slightly.
Now, if the fuel is around 25% of the total weight, then 20% of that or 20% of the total fuel weight is going to be usable fuel and 5% of the total weight of the aircraft may consist of unusable fuel. Now, what is unusable fuel this is fuel, which you cannot use. Thanks for your attention. We will now move to the next section.
Lecture - 48
Tutorial on Initial Sizing of Transport Aircraft
Hello, let us have a look at how we can do the initial sizing of a civil transport aircraft. And we will take Boeing 787 - 8 Dreamliner as our test case.
(Refer Slide Time: 00:33)
In this presentation, we will follow a color scheme, please understand this scheme so that you know what the various colors mean. General instructions like this will be in brown color, if there are any specified values from the database of Boeing 787, then they will be shown in black color. The blue color will be the assumed values. The calculations to be carried out will be marked with red color, so that the moment you see a red color, it means some calculations need to be done.
And this pause button it will be aid to your memories, so that you can stop the video when you see this button, do the calculations and then resume. And the values which are calculated will be shown in dark blue color. Towards the end we will compare our data with some source and those comparison values will be shown in green color.
(Refer Slide Time: 01:31)
Let us understand what is meant by initial sizing. At this point I hope you have already seen the video regarding initial sizing because this tutorial can only be done if you have already seen the video and if you understand what is initial sizing. So if you have not done I would suggest you stop here go back and watch those clips. If not you can go ahead. So as we know initial
sizing is the estimation of aircrafts design gross weight W0 before it starts the design mission.
The mission profile is specified by the user. But there are certain additional requirements which are given by the regulatory bodies.
(Refer Slide Time: 02:14)
Let us look at the source of the data and comparison for this particular tutorial. We have used the output provided by the Dimitri Simos of the piano software, so check out www.piano.aero, to where the code is described. And we are going to use Boeing Dreamliner sample analysis carried out in 2005 as our baseline.
(Refer Slide Time: 02:48)
Let us look at some useful data about Boeing 787 - 8 which we will need to do this tutorial and the source of this data is also from the output on piano by Simos. We are going to look at a baseline case with 224 passengers. And the operational items which are going to be carried by the crew members to serve these passengers would be 963 pounds or 437 kg. So we will add this in the crew weight.
The maximum payload weight of the aircraft is 100000 pounds or around 45.372 tonnes. It is assumed that the mass of the baggage and the passengers would be 210 pounds and for the crew members it would be 200 pounds each. Now from the source given by the Dimitri Simos,
we know that the cruise specific fuel consumption of this aircraft in loiter and cruise phases are specified as mentioned.
We have mentioned here the units in the SI system, the data is actually provided in terms of pounds per hour divided by pound force, but we have converted that number into milligrams per Newton seconds. And of course, the wing aspect ratio is 10.58.
(Refer Slide Time: 04:18)
(Refer Slide Time: 04:21)
Let us look at the mission profile of Boeing 787. The mission profile that we will consider will be a simple one which will involve several segments. So the first segment will be the warm up
taxi out and take off. The next would be the climb segment. After that we have a cruise segment
and it is mentioned that the cruise altitude is 37000 feet, Mach number is 0.850 and the total
distance to be covered in cruise is around 8000 nautical miles.
(Refer Slide Time: 04:53)
And then we have the descent segment we descend down to the loiter altitude and then there is a loiter for about 30 minutes. After which you have a missed approach.
(Refer Slide Time: 05:06)
And then you divert the aircraft and travel a distance of 200 nautical miles at a Mach number of 0.535, while flying at an altitude of 22117 feet, these numbers have come from the source, which I have already mentioned to you.
(Refer Slide Time: 05:21)
And finally, the last segment is the approach and land segment. So this table shows you the data to be used. And because it is in black color, it is understood that this information is specified by the user as a mission profile. One more point you need to know which is the reserve fuel fraction, how much is the additional fuel to be carried beyond the mission fuel that is 5%.
(Refer Slide Time: 05:47)
So, the first step initial sizing is the takeoff weight buildup. So the takeoff weight can be considered to be a summation of 4 items, the crew weight, which includes the items, the operational items, the payload, the fuel and the empty weight. The empty weight would be the weight of the structure, the engines, the landing gear, equipment, avionics etc. Now in this
particular situation, ????? is available from operational requirements as well as some regulatory requirements.
And ???????? is a specified number. So therefore, if we can somehow estimate ????? and ??????, then we can get a first estimate for ?0, which is the initial sizing. So the problem now is to determine the values of ????? and ????? and ??????. So these are the 2 unknowns which
are to be determined.
(Refer Slide Time: 06:48)
The equations for initial sizing are very straightforward. As I mentioned, you can replace ?0 by a summation of 4 terms. But since 2 of these terms are specified by the requirements of the mission, we keep them in the numerator, and we take the remaining 2 terms in the denominator,
and then we divide by ?0 on both sides. So we get 2 ratios, the empty weight ratio and the fuel weight ratio. So now, since the numerator is known, therefore to calculate ?0, we only need to calculate ?̅? and ?̅?, which are the remaining 2 unknowns.
(Refer Slide Time: 07:29)
Let us see how the crew weight for Boeing 787-8 is estimated. There are 2 kinds of crew there is a cockpit crew inside the cockpit and there is a cabin crew inside the cabin. As per regulatory requirements that have to be minimum 2 pilots in the cockpit. But for durations more than 8 hours, we need at least 2 more. In our case, the flight is around 8000 nautical miles.
So surely it will travel for more than 8 hours. So we will assume that we will occupy the entire space of 4 crew members. So there will be 4 crew members in the cockpit. In the cabin, we require 1 crew member for every 35 passengers to ensure their safety during emergencies and also their comfort and to provide them services. In case of Boeing 787 there is a provision for 7 crew members. So we will assume that all 7 are presence.
Which means, there are totally 11 crew members, each of whom is 200 pounds for their weight and for their baggage. So therefore the crew weight turns out to be 1000 kilograms. But remember, we have to also carry operational items, and this has been specified as 963 pounds,
so therefore the total crew weight would be 1437 kilograms.
(Refer Slide Time: 08:50)
Let us look at the ???????? estimation. In this case, of course it is already specified. But just to complete our information. The payload consists of passengers, weight of the passengers, weight of the baggage and the weight of cargo. In our case, we have been told that each passenger weighs 210 pounds. So when we calculate the payload weight in pounds, we will
use this simple formula, converting it into kilograms, we can use the formula as shown.
For Boeing 787 - 8 we are told that the maximum payload is 100000 pounds. So since there are 224 passengers, therefore the payload with all the passengers and their baggage will be 21347.2. And in our design mission, we assume that we do not carry any extra cargo. However
because we can carry a total of 100000 pounds, therefore if required the cargo can be carried to the tune of 24 tonnes approximately. But in our case, we are going to assume for the design mission that you are only carrying the 224 passengers and their baggage.
(Refer Slide Time: 10:01)
Now let us see how we estimate the empty weight fraction. As I mentioned, 2 unknowns are remaining, the empty weight fraction and the fuel weight fraction. For the empty weight fraction, we normally reach out to historical information.
(Refer Slide Time: 10:15)
So if you refer to the standard textbook by Daniel Raymer, the formula is ??0 ????, where A and C are constants. And their values are different for different aircraft types. And we obtain these values from statistical curve fits, as I will show you very shortly. The term ??? takes care of the additional weight due to variable sweep. So in our case, there is no variable sweep. It is a fixed wing aircraft, so this factor will be 1.0.
However, if we design an aircraft with variable sweep, the additional weight because of that would be approximately 4% of the empty weight fractions. So therefore, we have to add a factor of 1.04.
(Refer Slide Time: 11:02)
So, if you look at the textbook by Daniel Raymer, there is a table given where the coefficients A and C, both in metric units, that is in kilograms, and in pounds are specified, the coefficient C remains the same, whether you use the power remains the same whether you use the value in pounds or in kilograms.
(Refer Slide Time: 11:27)
So since we are going to work in SI system, we will not worry about the units in pounds, so we will go into metric. And since our aircraft is a jet transport aircraft, we have to use the values as 0.97 for A, when W0 is in kilograms and -0.06 for C.
(Refer Slide Time: 11:47)
Let us have a look at how the empty weight fraction trends are there for various aircraft type. So, in this particular figure, the largest coefficients are generally for flying boats, you can see they can go as to as high as 0.7, followed by jet fighters, jet trainer, general aircraft general aviation twin engine aircraft, powered sailplane, twin turboprop, agricultural aircraft,
homebuilt metal or wood aircraft, homebuilt composite aircraft, sailplane unpowered, general aviation single engine aircraft.
This is the curve for jet transport with which we are interested. Notice that the empty weight fractions can go as high as nearly 0.53 or 0.54 depending on the aircraft weight. And the lightest fractions are for the military cargo, which are seldom beyond the value of 0.44 or 0.45. So the highest empty weight fractions are seen for the flying boat and the lowest empty weight
fractions are seen generally for the military cargo aircraft.
(Refer Slide Time: 13:04)
So, this entire figure is shown in one shot in this particular graph, which is taken from the textbook by Raymer. So, we have seen, so what we need to do is we need to choose a line which is relevant to our type in our case it is jet transport. We assume some value of W 0 for example, if he assumed the weight to be 100000 pounds, a 100000 kgs then we can estimate we bar directly as a ratio. So if the extra weight is 100000 kgs then the empty weight fraction is around 0.49.
What do we do for Boeing 787 - 8. Unfortunately, we do not know its gross takeoff weight that is what we have to determine. So therefore, we cannot use this method directly we cannot get the empty weight fraction as a number. We have to use this expression because in our case W takeoff is itself a variable which has to be determined. So therefore, we will use the expression ?̅? = 0.97???−0.06
(Refer Slide Time: 14:11)
Let us look at how we estimate the next variable which is the mission fuel fraction. So, just a recap, the fuel in the aircraft is basically mission fuel and reserve fuel. The mission fuel depends on the type of the mission that you are flying, the aerodynamics of the aircraft and the engine SFCs. We need reserve fuel for 3 major contingencies either for missed approach diversion or hold.
Or some errors in navigation because of and also route weather effects and plus a small amount of fuel will be trapped in the pipelines, which will not be available to you. So in our method that we follow for initial sizing, we have a very fundamental assumption that the mission fuel segment weight is proportional to the aircraft weight in that segment. So, a heavier aircraft is going to consume more fuel and hence give a higher fraction.
And also we have to assume that the value of this view is independent of the general aircraft weight, it only depends upon the weight of the aircraft in that specific mission, it does not depend upon the weight of the aircraft in the other missions.
(Refer Slide Time: 15:25)
So, going ahead here is our basic simple mission profile. So we number the segments from 0 to 7 with 0 being that start and 1 being the takeoff and 2 being climb et cetera, et cetera. So for the ith segment, the mission segment weight will be ?? ??−1. And the total fraction will be ?7 ?0
in this case, which can be obtained by just a multiplication of the individual mission fuel weight segment fraction.
So, because of the assumption that we have made, this particular equation becomes very simple.
So, all you need to do now is calculate using some method or by assumptions, the weight of the aircraft at the end of the mission divided by the weight of the aircraft at the beginning of that particular segment. So for every segment, we have to now calculate the ratio as weight at the end of the segment upon weight at the beginning of that segment.
So for takeoff, we are going to use some historical information, for climb also we will use some historical information, for descent we are going to ignore the weights. So this number ?4 ?3 will be equal to 1. And similarly, for the land, for the approach and landing we are going to assume from historical data. So, 3 of the mission segments are assumed from historical data, one of them is assumed to be a segment which does not consume any fuel.
So what is remaining now is 3 segments, ?3 ?2 , that is the cruise segment, ?5 ?4, which is the loiter segment, and ?6 ?5
which is the diversion segment. So all we need to do now is to calculate the
segment fuel fraction for these 3 segments. And then we can multiply all these terms together to get the total fuel fraction.
(Refer Slide Time: 17:32)
So, as I mentioned for 3 of these segments, that is the warm up takeoff and landing, and also climb, we are going to assume it from this table given by Daniel Raymer. And we will also assume that the fuel consumed as well as the distance travelled during the descent segments is going to be ignored.
(Refer Slide Time: 17:55)
So what happens when you use historical data is that in this mission, this was the basic equation.
And 3 of these ratios, or other 4 of these ratios are now replaced by, values available from historical data. So if you multiply those 3 that is 0.97 into 0.985 into 0.995, you will get 0.9506.
In other words, ?7?0is simply going to be a multiplication of the fuel fraction in 3 segments the cruise segment, the descent and for the loiter segment and the diversion segment.
(Refer Slide Time: 18:41)
So before that, we need to estimate the (??)???. And again, we look at historical data.
(Refer Slide Time: 18:48)
Because there is no other way you can do it at this stage of the design when you do not know much about your aircraft. So first of all, let us look at what are the approximate values of ??,cruise (??)???. So for a commercial jet transport is generally specified that the values of (??)???
would be nearly about 15 to 18. And the average would be 14.4. So if you do not have any information on you do not have any data about the aircraft you are safe to assume these values. However, please note that modern day aircraft have a very high (??)??? values typically of the order of 20.
(Refer Slide Time: 19:26)
So here is a graph taken from Raymers textbook which talks about the wetted area ratio that is ???? ???? for various aircraft types on the basis of their shapes. So what we do is we eyeball our aircraft in this particular figure, we have a rough idea right now about how our aircraft will look like. So you just locate where your aircraft will roughly fit. And then just read the value of ???? ????. So for Boeing 787 - 8 where do you think it will fit. So I think the aircraft figure is very similar to Boeing 747 except that Boeing 787 has got a much more slender wing compared to Boeing 787. So that is why it is positioned slightly below and slightly to the left of Boeing 747. So it
sure turns out that the value of ???? ???? at that particular point turns out to be 6. So roughly it is a whole number.
(Refer Slide Time: 20:36)
So, that means you calculate the reference area of this aircraft multiply by 6 you will get the wetted area. Now, once you know the wetted area, you can calculate the wetted aspect ratio.
And then there is this figure which shows the typical (??)??? values for various types of aircraft as a function of the wetted aspect ratio. So first you calculate the wetted aspect ratio, which is aspect ratio divide by the ratio that we got in the previous slide ???? ???? So, we locate the applicable line for us and then we estimate the (??)???. For Boeing 787 - 8
the line would be the top most line which is for civil jets. We know that the wing aspect ratio is 10.58. And just now, we have seen that the ???? ????
ratio is going to be approximately 6. So, please pause the video here and calculate the value of the weighted aspect ratio, it will be 10.58 divided by 6, the number comes out to be 1.76.
So then in this graph, what we do is, we start from 1.76 go to the appropriate line and then take a left turn and hit the vertical axis we see that the value of ?? is estimated to be approximately 21. So this is how you can estimate the max ?? of the aircraft.
(Refer Slide Time: 22:05)
Now, fuel weight fraction is estimated using mission profile and the historical data for engines.
(Refer Slide Time: 22:13)
So, first let us look at there are 3 segments for which we need the fuel fraction in first is cruise, the other is the loiter and third is the diversion which is also a cruise. So, for ?3 ?2 ratio we assume that we can follow the Breguet range equation, which is as shown in the screen. So what you
need is ??????? , ?????????, (??)?????? and if you know the value of R, then you can invert this expression and you can easily get the value of ??−1 ??
Where R is the cruise range, c cruise to this specific fuel consumption per second. Remember the units are very important. Notice that the units of velocity are meters per second, and the units of range are meters, so therefore, to balance the units on both sides, since L/D is dimensionless and log of weight ratio is dimensionless the units of ??????? have to be per
second. Then in that case it will balance the units on both sides.
So, the value of c cruise given in the requirements or in specifications is not in the units of per second but we will convert it. And since we are looking at optimization of the fuel fraction for a range of a transport aircraft, we know that the (??)?????? = 0.866 ∗ (??)??? (Refer Slide Time: 23:42)
So let us see how to estimate the ?3 ?2. So what are the specifications, it is specified that the R cruise is 8034 nautical miles, which is 14887 kilometers. We also know the cruising altitude and you also know the cruising mach number. So first thing we do is we calculate the value of
sonic speed at that particular altitude. This you can get from the atmospheric tables or you can calculate based on the value of temperature. (??)??? was just previously calculated as 21. SFC cruise is given as 14.92 milligrams per Newtons second.
This is the value inputted from the Piano data, it has to be converted into per second by multiplying by 9.807 that is g and dividing by the 10 power 6 to convert the milligrams into kilograms.
(Refer Slide Time: 24:34)
So let us calculate the values of V, L/D and ?3 ?2. So V simply mach number into the sonic speed which is 250.81. And (??)??????
is 0.866 times 21, which is already known. So by inverting the equation, you can simply get ?3 ?2 = ?−?∗? ?∗(??)?????? And we get the value of
?3 ?2 = 0.6205 (Refer Slide Time: 25:06)
Moving ahead, let us look at the fuel fraction in loiter segment ?5 ?4 . Again for this we use a Breguet endurance equation ? =1???ln ??−1 ??
Here endurance ease in seconds and hence the SFCC loiter also has to be in per second, L/D and log weight ratio are dimensionless. Now, since we are looking at turbo jet engine aircraft, the L/D in loiter should be equal to L/D max. (Refer Slide Time: 25:34)
So let us see how these numbers pan out for Boeing 787 - 8. The endurance time is half an hour or 1800 seconds and L/D is 21, SFC already given in, during the loiter segment. So, just calculate the value of ?5 ?4 in the same fashion. So first you calculate L/D in during the loiter which is equal to L/D max which is 21 and then you put in e power minus endurance into SFC
divided by L/D, you get the value of 0.9901. So there is a very small loss in the fuel fraction during a half an hour cruise (Refer Slide Time: 26:24)
Then you go to diversion segment. Diversion segment is like a cruise segment. So therefore, the same formula applies, the same condition of 0.866 times L/D max also applies only thing is that the ??????? , ?????????, (??)?????? will change because it is at a different operating condition. So, let us see how it is calculated for diversion we are given that the distance to be travelled is 200 nautical miles at a height of 22117 feet at a mach number of 0.535.
So, (??)??? was 21 as obtained earlier, SFC during diversion is given. So you can convert it to per seconds, and then you just calculate the values of V, L/D and weight ratio. So, V is obtained by calculating T? = 288.16 − 0.0065 ∗ 6741.2 = 244.34 ? then when you know the value of T? = √???
and since, you know the mach number you can get the value of V and L/D is also available to you as a input. So, with that you can get ?6 ?5= 0.9824.
(Refer Slide Time: 26:24)
Let us estimate the mission fuel fraction for Boeing 787. This is our equation which had putting together of the various constant terms. So at this point I think you should pause and have a look at the numbers and calculate the values. So we get it as 0.5737. And to bring in the fact that we
need to carry 5% more mission fuel, we are saying that ???0 = ?̅? which you obtained earlier, to be changed slightly.
And the index of 0.8 has to be changed the reserve fuel fraction is 5%. So therefore, ?̅? = (1 + 0.05) ∗ (1 − 0.5737) Please take a pause and c
Log in to save your progress and obtain a certificate in Alison’s free Aircraft Layout and Component Design Methods online course
Sign up to save your progress and obtain a certificate in Alison’s free Aircraft Layout and Component Design Methods online course
Please enter you email address and we will mail you a link to reset your password.