Welcome to this course called ‘Organic Chemistry in Drug in Biology and Drug
Development’; So far, in the first part of this course, we have discussed the application
of organic chemistry in biology. And we have now the perfect background to go into the
second topic that is the drug development process and the role of organic chemistry, how
does it help. Now before we go on to the actual organic chemistry we need to know
certain aspects of this drug discovery process.
(Refer Slide Time: 01:00)
First of all what are drugs? And then what is the safety margin on all chemicals which
has some effect on the body? Whether all are drugs or not? So, I think some preliminary
knowledge is required before we move on to the actual drug design and discovery
Now, drugs are basically compounds that interact with a biological system to produce a
biological response. So, basically if you have a living system and you take a chemical
and that chemical goes inside and produces some affect that is called the biological
response. Now the question is that how safe are these chemicals, which produce some
biological effect? So, this definition basically includes any chemical which produces
some biological effect. Now that biological effect may be a toxic effect, may be having a
lethal action on the living system or may be having a beneficial effect.
The drugs should be such chemicals which have beneficial effect on a living system like
the human as we will consider the human as our model. Now no drug is totally safe, most
of us know that the all drugs have some side effects and the quality of drug varies
according to the side effects that they might have.
Now to minimize the side effect and to maximize the biological response, we need to
adjust the dose level. What is called the dose? Like some pills are taken in 500 milligram
and maybe the restriction is that you can go up to 4 times a day, some could be 2 times a
day. Now how was this dose determined? That is determined by the beneficial effect vis
a vis the toxic effect that it may have. So, if you cross certain dose, the same drug may
act as a poison, it can produce a toxic effect or sometimes a lethal effect that a person
may die of that.
So, dose is very important and no drug is totally safe. Now, this dose development
dealing with how to maintain the proper dose is very important, because as I told you
that a drug can be a medicine or it can be a poison. The therapeutic index is a parameter
which tells you how safe is the drug; that means, suppose if you found that 500
milligrams of dose is sufficient to produce a beneficial effect and suppose you cross 10
gram, a 10 gram dose causes a toxic effect. So; that means, you have a therapeutic
window that 500 milligram is a beneficial effect and 10 gram is a toxic effect. So, in
between you do not have any problem. So, you can take 500, even you can take 1 gram,
so long as you are below the toxic dose, so that is beneficial to the person or to the
Now if this window is very small, the beneficial effect and the toxic effect then there is a
problem. And you know the term ‘drugs’ has been a misnomer in today’s context,
because we are hearing drug addiction and then drug poisoning etc.
So, basically we are talking about drugs which are having beneficial effect and that can
be regarded as the medicine. So, the drugs which are having beneficial effect are called
medicines; so all drugs are not medicines. The drugs that we talk about in relation to
addiction are the ones that basically create some kind of addiction, so that the person
takes the drug even if he or she does not require that. But his mentality is such that he
thinks that taking that particular chemical as a drug will cure whatever problem he is
We have heard of many cases of death due to drug poisoning and that is because these
people cross the therapeutic index of whatever is prescribed to have a beneficial effect.
So, once they cross the therapeutic index, or the toxic dose, they are going to have these
toxicity related deaths.
Now it is very interesting that the human body is made up of a very complex biological
system. So, what will happen, now if you take a chemical; obviously, they are going to
interact with this complex system which is going to affect the chemistry or biochemistry
that is going on in the body; that means perturb the metabolism of the body.
(Refer Slide Time: 07:39)
Now, if this complex processes are all being targeted or are being disturbed by this
external agent which is called the drug; then that is not a very safe drug or that is not a
very specific drug. If a chemical interacts with several biochemical agents or
biochemical processes inside a living organism then it is not a good drug. Now that
means, a good drug is one which basically targets specifically some of the biological
agent that is present inside the body; it could be a protein, it could be nucleic acid, it
could be carbohydrate or lipid without causing any toxic or unwanted side effect.
But as I told you, there is no drug in the market that completely satisfies this condition;
that means, that only targets one particular molecule inside the body without having any
toxic or other side effects. Now side effects come from interaction of this chemical or
this so called drug with other molecules which are not targeted in principle. Suppose I
have some cholesterol related disease, like hyper cholesterol, the cholesterol is higher
then what is expected in the normal human being.
Now if cholesterol is very high; that means, the cholesterol is made in the body at a
much at a higher level, then what is required. Now who makes the cholesterol? It is the
enzymes that are present in the body. So, suppose I target one of the enzymes which are
involved in the biosynthesis of cholesterol.
So, if I inhibit that enzyme, then the cholesterol biosynthesis will stop or it will be
modulated, depending on the type of inhibition and the IC50 values of the inhibitor. But if
that inhibitor which is supposed to reduce the cholesterol level, interacts with some other
liver enzymes which are essential for metabolism of many of the chemicals or it is
targeting other enzymes which are involved in the metabolism of the diet, then what will
happen? Then I have the side effect or this chemical produces acidity inside the stomach
like what aspirin does.
Then that is not a good drug. More the side effect; that means, more the interaction with
other chemicals inside the body, other than the target, then you have these toxic effects
arising from the drug. But just to be very clear that no chemical and no drug or no
medicine in the pharmaceutical market today completely satisfies all these condition: it
should not have any side effect, no toxic effect and that its therapeutic window should be
But some drugs come very close to these ideal drugs; one example is penicillin.
Penicillin has been one of the safest and most effective anti-bacterial agent ever
discovered. It does not have toxicity or side effect; that means, it is not targeting other
enzymes or nucleic acids or any other biological molecule which is essential for the
human being. It is targeting only the bacteria that are causing the disease and when we
discuss the mechanism and action of penicillin you will know why it is so specific and
why it is so effective and why it does not have side effects.
However, it still has got some problem like many of the individuals can experience
severe allergic reactions to this compound. So, whenever you go to the doctor and if he is
prescribing penicillin, the first thing he will ask is that are you allergic to sulphur;
because penicillin has a sulphur moiety. If the patient is allergic then the doctor will not
prescribe any penicillin type of molecules; under such situation, the other types of
antibacterial agents have to be prescribed.
Thus penicillin is relatively safe, because if you do not have allergic reactions then it
does not have much other side effects. There are some of the drugs that are distinctly
dangerous. Morphine is one such example. Morphine is a natural product and that is used
as an analgesic; that means, pain reliever and it is given mostly to terminally ill patients
suffering from cancer, because the pain is too much and at that time one has to take
However the problem is, it has got side effects and one of them is what is called
tolerance; that means, may be today 500 milligram of morphine is sufficient to give me
relief from the pain, but after one month 500 milligram may not be sufficient, I have to
increase the dose. The same thing happens with many of the sleeping tablets; that you
start with a very low dose, but as days pass by, the dose has to be increased. Now this is
what is called tolerance; that means, if the body develops tolerance very quickly;
consequently the morphine dose has to be increased.
And so, basically you run the risk of crossing the lethal dose (the dose that is required to
kill the person) and sometimes that may even happen. Similar is the case heroin, which is
another derivative of morphine that is also a very good pain reliever, but it is not
prescribed. And these drugs are only available on prescription; it is not to be used by
anybody without any prescription because of this addiction problem and the problem of
(Refer Slide Time: 15:04)
Now, the next question is what are drugs? I already told that drugs are mere chemicals,
but they are entering a world of chemical reactions; that means, they are entering a
biological system which is called a biological world and with which it will interact.
Therefore, there should be nothing odd in the fact that they can have an effect. However,
the surprising thing is that they can have specific effects.
These chemicals that can be branded as drugs only have some specific effects; that
means it mostly interacts with something which is the causative agent of the disease, but
without interacting with others. But as I told you, side effects are there, but the medicinal
chemist or the persons who are associated with drug discovering process, try to minimize
the side effect while maximize the efficacy of the molecule.
(Refer Slide Time: 16:11)
Efficacy means that efficacy towards relief of the disease.
(Refer Slide Time: 16:17)
Now, the question is that what are these targets? The targets could be proteins. Now
proteins can be enzymes, so you can target enzymes, you can target receptors; receptors
are basically proteins which are on the surface of a cell and when a small molecule binds
and then it produces some effect and which is very important.
And so, some may be over active receptors, so you have to make a molecule which goes
and binds and stop the signaling path way or reduce the extent of signaling pathway. And
some could be transport proteins; that means proteins which transport molecules inside
the cell. So, if you want to lower the metabolic activity, then you have to target these
transport proteins; because transport proteins are basically taking important molecules
from outside and taking it into the cell. So, for many diseases, that is needed to be
stopped. So, these are the proteins; that means they are mainly enzymes, receptors,
transport proteins. Other possible targets can be the nucleic acids (DNA and RNA).
Now nucleic acids are targets mainly when you want to kill the cell by a molecule which
goes and destroys the nucleic acid. And this is typically what is required in case of
treatment of diseases like cancer, because there you want to destroy the the cancerous
cell. Most of the drugs that are based on nucleic acids, but not all, are either anti-cancer
agents, anti-viral agents, or they could target other degenerative processes, that are
involved. But again, just nucleic acids are mostly targeted in case of cancer; and for other
diseases we generally target the proteins and among the proteins I said enzymes,
receptors and transport proteins.
One interesting point is that the drugs we take are really small molecules. On the other
hand, they are interacting with molecules which are very big, like these proteins which
are much bigger as compared to the small molecule that we use as a drug. I am sure you
have never noticed a drug which has got a molecular of say 10000, it is always a small
molecule and this small molecule interacts with a very large molecule.
We have gone through the enzyme chemistry; that the enzyme also take some small
molecule and converts into products and there the molecules are very small and they go
and bind to what is called an active site. Now the small molecules, after binding to the
enzymatic site, they undergo some transformation.
Now, there are proteins which has got a binding site, but there is no as such chemical
reaction; but as the small molecule binds, it creates a disturbance on the enzyme and that
disturbance creates a change in conformation and the change in conformation creates a
signal and that signal is then transmitted into the cell or other cells and then other
biochemical processes which are very important for the survival of the cell that happens.
So, basically we can say that usually the targets are macromolecular targets; proteins or
nucleic acids. And usually they have a binding site, especially if they are proteins; they
have a site which is called a binding site. And we know what is the active sites. So, the
small molecule goes here and binds. And then creates either, if it is an enzyme then the
small molecule is transformed into a product or some other metabolite and if this protein
is not an enzyme, but a receptor then the small molecule binds and creates some signal
down inside the cell; that means, the cell cytosol.
So, other molecules are told about this binding of the small molecules and then according
to that they have to act. Until the small molecule binds there is no such signal. So, this is
very important in many of these metabolic processes; this is what happens that a receptor
is there and other small molecules binds to the receptor.
In DNA also, if you want to design an anticancer agent, then you have to design a
molecule which destroys or breaks the DNA molecule. But to make it very specific, it
should have some binding partner; the smaller molecule should have some binding
partner which allows it to sit onto to or to interact with the DNA and not with other
So, basically if you have a DNA molecule, and if you have a small molecule here and
you want it to be very specific to the DNA, then you need to attach something which
binds to the DNA and this goes and cuts the DNA or destroys the DNA. So, selective
binding is always important in drug discovery.
Now the question is, what are these binding interactions? It is very similar to the enzyme
chemistry; the binding interactions could be many weak interactions like electrostatic,
ionic interactions, hydrogen bonds, van der Waals interactions, dipole-dipole
interactions, and hydrophobic interactions. On the other hand, there could be some
inhibitors or some molecules which goes and binds to the protein and then forms a
covalent bond, they are called irreversible systems; the ones binding through non-
covalent interactions are the reversible ones.
(Refer Slide Time: 23:52)
Now, this is the diagram; suppose this is your molecular target and it has got a pocket,
that pocket is called the binding site. And now you give a chemical which is a drug, and
which is specific for binding to this pocket; so, that goes and binds. So, basically this
geometry is complimentary to the binding site; but the binding site may be slightly
distorted, it is not totally tailor made that it goes and binds and there is no adjustment on
this binding pocket.
Usually what happens; that the binding pocket is very close to the geometry of the drug,
but as it goes, it changes the conformation a little bit, so as to adjust the drug for sitting
properly at the binding site; this is what is called induced fit. You can see that this is
slightly slanted; this binding site is still little bit wider, but as it binds and so these two
white portions they close the gap between this end and that end, so that the drug sits in
the binding site properly.
Now this is the enlarged picture and we now have all these weak interactions, because
this drug will go not only because of the geometric complimentarily, there must be some
other electronic forces like the weak interactions. Now as soon it binds, if it is a receptor
then you have the generation of signals that we know.
Suppose I have a receptor which has a natural metabolite as the substrate and when it sits
into the active site then it develops all these signals and these signals are transmitted by a
process call signal transduction and that creates lot of ion movements, channel openings.
Basically it starts a cascade of reactions involving several metabolic pathways; but those
metabolic pathways are very important.
A very simple example, if I take a neurotransmitter, say dopamine; so dopamine will
have a binding site on the receptor, so, dopamine must be having some receptor. And
when the dopamine sits onto the binding pocket, it creates a signal and the overall effect
we know that it creates something which elevates your mood. Now if somebody is very
depressed, that means, his dopamine level has a problem, the concentration of dopamine
has a problem.
He cannot produce dopamine because it is inbuilt in his metabolic system. So, what you
have to do, you have to give a molecule from outside which looks like dopamine. So, in
addition to dopamine you have another molecule which when sits onto this binding
pocket or binds to this site it also creates the same signals. So, based on this principle
that the drug goes into the binding pocket and creates a signal, we are talking about the
receptor chemistry, we are not talking of any chemical reaction.
So, here there are several things that can happen; I can make a molecule which also like
the natural metabolite dopamine goes and binds and gives similar kind of signal that is
called an agonist. An agonist is a molecule which goes into the active site, interacts with
the binding site like the natural metabolite and produces the same kind of signal. Now, a
question that arises is that what is the extent? What is the strength of this signal? Because
sometimes the strength of the signal may be very high, like the original metabolite,
sometimes the signal may be little less. Accordingly, you have full agonist and partial
What is a full agonist? That means if I have a graph like this, suppose the effect is
something like this, this is a positive effect. If it is for a natural ligand, I plot its activity
versus concentration. This is first the natural curve; that means, I do not have the drug, I
add the small molecule like dopamine, the natural metabolite and I see what is the
response, what is the effect suppose this is the curve and then I replace this natural
metabolite and add the foreign molecule as the drug.
And suppose it produces similar kind of effect, so, it is a full agonist. But if it produces a
partial effect like this at similar concentration, then it is a partial agonist; but there are
some molecules which goes and sits into the binding site and does not produce any
effect; that means, it does not produce any effect. So, the natural metabolite needs more
concentration. So, more concentration to stop the external molecule from binding, it is
like your competitive inhibition.
Suppose you have a very active dopamine level. So, you need to calm down, you have to
now use some molecules with sits at the active site, so that the drug cannot bind at this
pocket and it does not produce any signal for signal transduction. Thus when the foreign
molecule sits here, basically it stops the metabolic process that you are interested in, so
that will be called an antagonist.
So, an antagonist basically goes and binds and does not produce any signal. Partial
agonist produces partial signal like the original metabolite which generally we call a
ligand, because this is nothing but a ligand and the macromolecule that interaction we are
talking about. Thus there are some molecules which produces similar effect like the
natural ligand and then there are some which actually produce opposite effect and that is
called inverse agonist.
Now, what is this opposite effect? Let us consider some excitory neurotransmitters; that
means, they excite the system. But, suppose the molecule that you are adding is now
acting as an inhibitory neurotransmitter like system; that means you are targeting an
excitory neurotransmitter and you are inhibiting the effect of that excitory
neurotransmitter. So, that is an opposite effect; so if you have inhibited it; suppose it is
an excitory neurotransmitter that is having this type of curve and if you have a molecule
which produces a inhibitory curve like this, then that is called inverse agonist. So, these
molecules, these terminologies are very important in drug design and then agonists have
full and partial.
(Refer Slide Time: 32:32)
These are the some of the interactions, I think this is already known that this is the
electrostatic interactions and this is the hydrogen bonds that type of interaction. This
drug could be a donor, this receptor could be an acceptor, or drug could be acceptor and
this receptor could be donor. And hydrophobic interaction implies that there are lots of
hydrophobic amino acids residues here, and the drug also has lot of hydrophobic portions
in it. So, that can induce these hydrophobic interactions.
(Refer Slide Time: 33:10)
How the drugs are classified? Classification of drugs is little difficult. Drugs can be
classified, depending on the biological and pharmacological effect that they have, like
we can call some drug analgesics that means, pain relievers, some drugs antipsychotics
that means, they effect the brain and then the mental condition,. anti-hypertensive that
means, they effect the blood pressure or lower the blood pressure, then we have anti-
asthmatics so that works against asthma and then you have antibiotics that works against
However this does not help an organic chemist, the problem is this does not give you any
structural information; like many antibiotics are there which can vary widely in structure.
So, this classification is good for the doctors that he has a list of anti-psychotics; he has a
list of anti-hypertensive. But as an organic chemist trying to develop new drugs, he or
she wants to know what are the structures, what is the similarity between the structural
similarities between these classes which are grouped together like a analgesics what are
Now we are more interested in the organic skeleton and what it has; like we have now
some molecules or some group of drugs that are called penicillins, some are called
barbiturates. Barbiturates are also a heterocyclic framework obtained from urea and
malonic acid; opiates are obtained from the opium and then steroids, then you have
catecholamines. So, that gives the structural pattern; in some cases this is useful
classification as the biological activity and mechanism of action expected to be same for
the similar structures involved.
So, for organic chemist I will say that this type of classification is more useful to them.
(Refer Slide Time: 35:44)
But there are other ways of classifying drugs. So, one was earlier from the biological
effect, the second one from structural variation and the third one is according to the
target that they interact with. So, I said that every drug has a target. From the target you
can classify drugs as anticholinesterases, because acetylcholine is another
neurotransmitter. So, if you are developing agonist, antagonist, and inverse-agonist all
these against those acetylcholinesterase receptors, so those compounds will be called
So, here it is basically inhibiting; there could be two types of anticholinesterase, one is
where you can have molecules which interact with the receptor, but another is where
there is an enzyme which is acetylecholinesterase which hydrolyzes acetylcholine;
acetylcholine is a molecule which is like this. There are three methyls, the nitrogen is
plus and then O very simple molecule, but it is a neurotransmitter and it is if you
hydrolyze this acetate molecule it becomes it lose it is neurotransmitter activity.
So, if somebody is having low concentration of acetylcholine, that means, its hydrolysis
is very fast, you can then inhibit that enzyme which is called acetylcholinesterase
inhibition. So, the molecules which actually work on this acetylcholinesterase;
acetylcholine remember acetylcholine works by two principle, one is you can control the
concentration of acetylcholine or the effect of acetylcholine by targeting the receptor or
by targeting the hydrolysis. Here we are talking about acetylcholinesterase; that means,
we are talking about the enzymatic version.
So, if a molecule stops this hydrolysis then those molecules are called
acetylcholinesterases, so this is target based. Similarly; however, again target, if you
have target based then you might think that only similar molecules go to the same target.
So, you can have a notion that all this acetylcholinesterase inhibitors are having very
similar structure that may be true, but they are this is not an inviolable assumption, it
says that you have to be careful. There are various dimensions of an interaction of a
molecule with a target.
Suppose there are 10 possible interactions that a ligand has with the target. Now, some
molecules can utilize 5 of these, another molecule utilizes 5 of the remaining and some
molecules may be utilizing all the 10 interactions that are happening. So, you have
different structural features in every inhibitor.
(Refer Slide Time: 39:10)
Now, what is the drug discovery process? Let me tell you little bit about that, before we
go onto the actual topic. Initially in earlier days, it was kind of what is called
serendipitous discovery. Serendipitous discovery means, you are trying to do something
and you get something else and that is called serendipity. Like in many cases, some
drugs are discovered by looking at nature’s signature.
Nature signature means, I will give an example like salicylic acid or acetylsalicylate,
which is aspirin; the discovery of aspirin was like this: we all are aware of willow tree
with which cricket bats are made, the willow tree grows near the lakes and the ponds.
And it may sound very strange, but people those days (we are taking about the 17th
century or 18th century) when not much development has happened in chemistry or forget
about biology and medicinal chemistry, only looked at the nature.
So, they found that willow trees were growing in a very wet land, as they were very
adjacent to the pond or a lake. So, this willow tree must have some resistance against
common cold or fever, because we know that if we are drenched in a rain for a particular
day and then possibly you will get some fever or headache or all these things can happen.
So, it is very strange that people thought that willow tree must be having some
compound which is making the willow tree stand upright without having any problem.
So, they were actually connecting the tree with the human being; ultimately what they
did, they took the bark and then extracted it, extracted with water and they started to
drink this water. And indeed that was reducing the fever and other associated headache
etc; but there should be some rational why it is effecting such things. So, some chemist,
at Bayer, started looking at the chemical that is there in willow tree and they found that
there is a glycoside of salicyl alcohol.
Salicyl alcohol is nothing but this O H. So, it is a glycoside, it is a O-glycoside of salicyl
alcohol and then there are intelligent people who immediately thought that this must be
the compound, that glycoside must be hydrolyzing and this must be the compound which
is the active compound.
And then while doing so, they found that actually this is the one that is called salicylic
acid. So, they thought that salicylic acid could be a good chemical which may be acting
on the body to have these analgesic activities. But salicylic acid is extremely toxic; you
cannot take salicylic acid inside your stomach. What you can do, you can take salicyl
alcohol and that goes in the body and then that will be oxidized by enzymes to salicylic
acid and then that can show the effect.
So they reduced the acidity of this molecule by blocking it with acetyl group. So, in the
body that goes and gets hydrolyzed to salicylic acid and that is why this was giving the
anti-analgesic activity. You see these are from signatures of nature; there are many
signatures in and around. So, people were looking at how nature deals with other living
organisms, even if it is a plant how are they surviving with the harsh conditions.
One of the classic example of serendipity is penicillin; that Alexander Fleming was
looking for something else he was working with lysozyme, but in the process he
discovered penicillin. We will discuss that when we cover the antibiotics. Today you
cannot wait for some serendipitous discovery to happen or you cannot wait for somebody
who looks at the nature and starting gets some idea that we have to do this or do that.
Since the chemistry and biology has advanced so much. So, today’s drug discovery is as
rational as possible. So, this is the process of today’s drug discovery. Suppose somebody
is suffering from a disease. So, you have to identify what is the cause of this disease.
That means, you have to identify the target, in other words, you have to identify the
cause that it is basically causing the disease., For example reason which is associated
with high cholesterol level. So, you have the bi
"Nós enviaremos as instruções para resetar a sua senha para o endereço associado. Por favor, digite o seu e-mail atual."