Loading
Précédent Previous slide Next slide Suivant
New course

Ce cours a été révisé!

Pour une expérience d'apprentissage plus agréable, nous vous recommandons d'étudier la version mobile relogée de ce cours.

Emmenez-moi au cours révisé.

- or -

Continue studying this course

Outils de coupe des dents tranchant

  • Notes d'étude
  • Révisions du sujet
    Oyaje M.
    NG
    Oyaje M.

    Tooth-Edged Cutting Tools Sometimes plumbers need to make changes to a commercial or residential structure before installing plumbing materials and fixtures. Plumbers use tooth-edged cutting tools to make these changes. In these cases, plumbers are often doing work similar to that of carpenters. Knowing about both professions’ types of tools will be helpful in your work. The next slide presents some general guidelines on the preparation one needs to do before making a cut. Preparation is essential to making accurate and safe cuts. Click on the steps below to find out more: 1 Before starting to cut, determine what kind of saw and what kind of blade is most appropriate for the material you are cutting. 2 Carefully measure and mark the dimensions of the cut (its distance, angle, and depth). 3 Adjust the saw controls to match those measurements. (Whatever saw you choose, make sure it is in good working condition, with sharp teeth and a tight handle.) Hacksaw The hacksaw is a multipurpose tool used to cut metals. Hacksaw types include PVC saws and sheetrock saws. Mini-hacksaws often come with 6-inch-long blades called Tiny Tims, which are commonly used by plumbers. Hacksaw blades differ in length, flexibility, the set (or bend) of their teeth, and coarseness (number of teeth per inch), depending on the material they are made to cut. Hacksaw Blades The hacksaw blade most often used to cut pipe is a flexible-back blade. Its teeth are set, which means each tooth is bent to alternating sides so the blade cuts a kerf (the groove made by saw blade). The kerf is slightly wider than the blade. This prevents the blade from binding, and it reduces the friction that results from cutting. Blades are typically very coarse. Keep the blades sharp to make a good cut. Reciprocating Saw A reciprocating saw is electrically powered and can be used with a variety of blades. The choice of blade depends upon the material to be cut. A shaft pushes the blade forward and back. At the front of every reciprocating saw is a shoe plate. A reciprocating saw brings brute force to bear on a task and is designed for use on hard-to-cut materials. Note: • Never use a reciprocating saw without the shoe plate. • Like all electrical tools, this saw must be grounded to an earth ground. Portable Band Saw The portable band saw is used to cut a variety of materials, including pipes both with and without iron. These types of pipes are referred to as ferrous and nonferrous pipe. Tooth-Edged Cutting Tools Abrasive Saws Abrasive saws are used to cut pipe and other materials. These saws use a special wheel that can slice through either metal or masonry. The most common types of abrasive saws are the demolition saw and the chop saw. The main difference between the two is that the demolition saw is not mounted on a base. Demolition Saws Demolition saws run on either electricity or gasoline. These saws are effective for cutting through most materials found at a construction site. Although all saws are potentially hazardous, the demolition saw is a particularly dangerous tool that requires the full attention and concentration of the operator. Chop Saws A chop saw is a versatile and accurate tool. It is a lightweight circular saw mounted on a spring-loaded arm that pivots and is supported by a metal base. Because of its size and weight, it is often portable. A chop saw helps you get exact square or angled cuts.

    Douglas R.
    US
    Douglas R.

    Saws all have unique kerf cuts depending on the blade the saw is using.

  • Text Version
Notification

You have received a new notification

Click here to view them all